Showing posts with label 15. Turn the ignition switch to ON (II).. Show all posts
Showing posts with label 15. Turn the ignition switch to ON (II).. Show all posts

Sunday, 30 August 2020

2010 Acura Truck MDX V6-3.7L Page 195


15. Turn the ignition switch to ON (II).



16. Measure the voltage between slide position sensor 4P connector terminals No. 2 (+) and No. 3 (-).



Is there about 5 V?



YES -



Faulty slide position sensor, replace the slide motor.?



NO -



If there is no voltage, replace the power seat control unit. If there is battery voltage, repair a short in the wire (sensor line).?



17. Turn the ignition switch to LOCK (0).



18. Disconnect power seat control unit connector A (40P).



19. Disconnect the slide position sensor 4P connector.



20. Check for continuity between power seat control unit connector A (40P) terminals No. 15 and No. 29 and slide position sensor 4P connector



terminals No. 1 and No. 3 respectively.



Is there continuity?



YES -



Go to step 21.



NO -



Repair an open in the wire.?



21. Disconnect the 4P connector from the front up-down position sensor and the rear up-down position sensor, then disconnect the driver's seat



wire harness 8P [14P] connector.



[ ]: With seat ventilation



22. Check for continuity between body ground and slide position sensor 4P connector terminal No. 1.