2010 Land Rover Range Rover (LM) V8-5.0L Technical Service Bulletin # TECLTB00122 Date: 080310

2010 Land Rover Range Rover (LM) V8-5.0L Technical Service Bulletin # TECLTB00122 Date: 080310

Cooling System - Coolant Level Warning Message Displayed

No.: LTB00122

Issue: 1

Date: 10 MAR 2008

SECTION: 303

Engine Coolant Fill / Bleed Procedure

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

A condition may occur where the low coolant level warning message or lamp is illuminated. This condition could be caused by an incorrect coolant

level in the coolant expansion tank due to air being trapped in the system.

Action:

In the event of a customer concern of the above, follow the Repair Procedure outlined in this service bulletin to fill and bleed the cooling system.

PARTS:

No parts necessary

TOOLS:

No special tools necessary

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.

Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

VERIFY COOLANT LEVEL

WARNING:

Follow GTR and general workshop safety procedures when working on the engine cooling system.

1. Remove the coolant expansion tank cap.

NOTE:

View the expansion tank from the side, not the top.

2010 Land Rover Range Rover (LM) V8-5.0L Page 138

2. Verify the coolant level by viewing the side of the expansion tank. (Figure 1)

2010 Land Rover Range Rover (LM) V8-5.0L Page 139

3. If the engine temperature is cold (gauge on 'C') the coolant level must be at the top of the 'COLD FILL RANGE'. (Figure 2)

^ If necessary, top up the cooling system to the correct level with coolant.

4. If the engine temperature is normal (gauge on 'Normal') the level must be 30 mm (1.2 min) above the top of the 'COLD FILL RANGE'.

(Figure 2)

^ If necessary, top up the cooling system to the correct level with coolant.

BLEEDING THE COOLING SYSTEM / VERIFY COOLANT LEVEL

1. Bring engine to normal operating temperature:

^ Raise engine to 3,000 rpm for one minute.

2010 Land Rover Range Rover (LM) V8-5.0L Page 140

^ Let engine idle for five minutes.

^ Raise engine to 3,000 rpm for one minute.

^ Let engine idle for five minutes.

2. Verify the coolant level is 30 mm (1.2 in) above the 'COLD FILL RANGE'. (Figure 2)

2010 Land Rover Range Rover (LM) V8-5.0L SC Technical Service Bulletin # TECLTB00122 Date: 080310

2010 Land Rover Range Rover (LM) V8-5.0L SC Technical Service Bulletin # TECLTB00122 Date: 080310

Cooling System - Coolant Level Warning Message Displayed

No.: LTB00122

Issue: 1

Date: 10 MAR 2008

SECTION: 303

Engine Coolant Fill / Bleed Procedure

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

A condition may occur where the low coolant level warning message or lamp is illuminated. This condition could be caused by an incorrect coolant

level in the coolant expansion tank due to air being trapped in the system.

Action:

In the event of a customer concern of the above, follow the Repair Procedure outlined in this service bulletin to fill and bleed the cooling system.

PARTS:

No parts necessary

TOOLS:

No special tools necessary

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.

Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

VERIFY COOLANT LEVEL

WARNING:

Follow GTR and general workshop safety procedures when working on the engine cooling system.

1. Remove the coolant expansion tank cap.

NOTE:

View the expansion tank from the side, not the top.

2010 Land Rover Range Rover (LM) V8-5.0L SC Page 137

2. Verify the coolant level by viewing the side of the expansion tank. (Figure 1)

2010 Land Rover Range Rover (LM) V8-5.0L SC Page 138

3. If the engine temperature is cold (gauge on 'C') the coolant level must be at the top of the 'COLD FILL RANGE'. (Figure 2)

^ If necessary, top up the cooling system to the correct level with coolant.

4. If the engine temperature is normal (gauge on 'Normal') the level must be 30 mm (1.2 min) above the top of the 'COLD FILL RANGE'.

(Figure 2)

^ If necessary, top up the cooling system to the correct level with coolant.

BLEEDING THE COOLING SYSTEM / VERIFY COOLANT LEVEL

1. Bring engine to normal operating temperature:

^ Raise engine to 3,000 rpm for one minute.

2010 Land Rover Range Rover (LM) V8-5.0L SC Page 139

^ Let engine idle for five minutes.

^ Raise engine to 3,000 rpm for one minute.

^ Let engine idle for five minutes.

2. Verify the coolant level is 30 mm (1.2 in) above the 'COLD FILL RANGE'. (Figure 2)

2010 Land Rover Range Rover Sport (LS) V8-5.0L Technical Service Bulletin # TECLTB00122 Date: 080310

2010 Land Rover Range Rover Sport (LS) V8-5.0L Technical Service Bulletin # TECLTB00122 Date: 080310

Cooling System - Coolant Level Warning Message Displayed

No.: LTB00122

2010 Land Rover Range Rover Sport (LS) V8-5.0L Page 233

Issue: 1

Date: 10 MAR 2008

SECTION: 303

Engine Coolant Fill / Bleed Procedure

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

A condition may occur where the low coolant level warning message or lamp is illuminated. This condition could be caused by an incorrect coolant

level in the coolant expansion tank due to air being trapped in the system.

Action:

In the event of a customer concern of the above, follow the Repair Procedure outlined in this service bulletin to fill and bleed the cooling system.

PARTS:

No parts necessary

TOOLS:

No special tools necessary

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.

Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

VERIFY COOLANT LEVEL

WARNING:

Follow GTR and general workshop safety procedures when working on the engine cooling system.

1. Remove the coolant expansion tank cap.

NOTE:

View the expansion tank from the side, not the top.

2010 Land Rover Range Rover Sport (LS) V8-5.0L Page 234

2. Verify the coolant level by viewing the side of the expansion tank. (Figure 1)

2010 Land Rover Range Rover Sport (LS) V8-5.0L Page 235

3. If the engine temperature is cold (gauge on 'C') the coolant level must be at the top of the 'COLD FILL RANGE'. (Figure 2)

^ If necessary, top up the cooling system to the correct level with coolant.

4. If the engine temperature is normal (gauge on 'Normal') the level must be 30 mm (1.2 min) above the top of the 'COLD FILL RANGE'.

(Figure 2)

^ If necessary, top up the cooling system to the correct level with coolant.

BLEEDING THE COOLING SYSTEM / VERIFY COOLANT LEVEL

1. Bring engine to normal operating temperature:

^ Raise engine to 3,000 rpm for one minute.

2010 Land Rover Range Rover Sport (LS) V8-5.0L Page 236

^ Let engine idle for five minutes.

^ Raise engine to 3,000 rpm for one minute.

^ Let engine idle for five minutes.

2. Verify the coolant level is 30 mm (1.2 in) above the 'COLD FILL RANGE'. (Figure 2)

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00122 Date: 080310

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Technical Service Bulletin # TECLTB00122 Date: 080310

Cooling System - Coolant Level Warning Message Displayed

No.: LTB00122

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 234

Issue: 1

Date: 10 MAR 2008

SECTION: 303

Engine Coolant Fill / Bleed Procedure

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

A condition may occur where the low coolant level warning message or lamp is illuminated. This condition could be caused by an incorrect coolant

level in the coolant expansion tank due to air being trapped in the system.

Action:

In the event of a customer concern of the above, follow the Repair Procedure outlined in this service bulletin to fill and bleed the cooling system.

PARTS:

No parts necessary

TOOLS:

No special tools necessary

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.

Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

VERIFY COOLANT LEVEL

WARNING:

Follow GTR and general workshop safety procedures when working on the engine cooling system.

1. Remove the coolant expansion tank cap.

NOTE:

View the expansion tank from the side, not the top.

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 235

2. Verify the coolant level by viewing the side of the expansion tank. (Figure 1)

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 236

3. If the engine temperature is cold (gauge on 'C') the coolant level must be at the top of the 'COLD FILL RANGE'. (Figure 2)

^ If necessary, top up the cooling system to the correct level with coolant.

4. If the engine temperature is normal (gauge on 'Normal') the level must be 30 mm (1.2 min) above the top of the 'COLD FILL RANGE'.

(Figure 2)

^ If necessary, top up the cooling system to the correct level with coolant.

BLEEDING THE COOLING SYSTEM / VERIFY COOLANT LEVEL

1. Bring engine to normal operating temperature:

^ Raise engine to 3,000 rpm for one minute.

2010 Land Rover Range Rover Sport (LS) V8-5.0L SC Page 237

^ Let engine idle for five minutes.

^ Raise engine to 3,000 rpm for one minute.

^ Let engine idle for five minutes.

2. Verify the coolant level is 30 mm (1.2 in) above the 'COLD FILL RANGE'. (Figure 2)

Land Rover Range Rover (LM) V8-5.0L SC Cooling System - Coolant Level Warning Message Displayed

*********************************************************************************** ********************************************************************************

2012 Land Rover Range Rover (LM) V8-5.0L SC Page 1

Vehicle: All Technical Service Bulletins

Cooling System - Coolant Level Warning Message Displayed

No.: LTB00122

Issue: 1

Date: 10 MAR 2008

SECTION: 303

Engine Coolant Fill / Bleed Procedure

AFFECTED VEHICLE RANGE

CONDITION SUMMARY:

Situation:

A condition may occur where the low coolant level warning message or lamp is illuminated. This condition could be caused by an incorrec coolant level in the coolant expansion tank due to air being trapped in the system.

Action:

In the event of a customer concern of the above, follow the Repair Procedure outlined in this service bulletin to fill and bleed the cooling system.

PARTS:

No parts necessary

TOOLS:

No special tools necessary

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

VERIFY COOLANT LEVEL

WARNING:

Follow GTR and general workshop safety procedures when working on the engine cooling system.

1. Remove the coolant expansion tank cap.

2012 Land Rover Range Rover (LM) V8-5.0L SC Page 2

NOTE:

View the expansion tank from the side, not the top.

2. Verify the coolant level by viewing the side of the expansion tank. (Figure 1)

2012 Land Rover Range Rover (LM) V8-5.0L SC Page 3

3. If the engine temperature is cold (gauge on 'C') the coolant level must be at the top of the 'COLD FILL RANGE'. (Figure 2)

• If necessary, top up the cooling system to the correct level with coolant.

4. If the engine temperature is normal (gauge on 'Normal') the level must be 30 mm (1.2 min) above the top of the 'COLD FILL RANGE'. (Figure 2)

• If necessary, top up the cooling system to the correct level with coolant.

2012 Land Rover Range Rover (LM) V8-5.0L SC Page 4

BLEEDING THE COOLING SYSTEM / VERIFY COOLANT LEVEL

1. Bring engine to normal operating temperature:

• Raise engine to 3,000 rpm for one minute.

• Let engine idle for five minutes.

• Raise engine to 3,000 rpm for one minute.

• Let engine idle for five minutes.

2. Verify the coolant level is 30 mm (1.2 in) above the 'COLD FILL RANGE'. (Figure 2)

3. Install the coolant expansion tank cap.