***********************************************************************************
********************************************************************************
2012 Land Rover Range Rover (LM) V8-5.0L Copyright ? 2013, ALLDATA 10.52SS Page 1
Vehicle: All Technical Service Bulletins
Recall - Front Windshield Bonding
P028NAS1
22 OCT 2012
SECTION: 501-11
Safety Recall: Front Windshield Bonding
AFFECTED VEHICLE RANGE:
Range Rover (LM) VIN: CA370800 - CA370892
(specific VINs only; see attached list)
Model Year: 2012
CONDITION SUMMARY:
Situation:
A concern has been identified with certain 2012 model year Range Rover vehicles with the windshield which may not be correctly bonded to the
aperture. Where the windshield is not correctly bonded, water ingress might occur and there may be increased wind noise. In extreme cases where
there is insufficient bond between the windshield glass and the Polyurethane (PU) adhesive, full windshield retention may not be achieved in the
event of an air bag deployment or during a vehicle crash increasing risk of occupant injury.
Action:
Retailers are required to HOLD all affected vehicles in the above VIN range that are in their control and refrain from releasing the vehicles for new
or used vehicle sale pending completion of the rework action detailed in this Technical Bulletin. Affected vehicles already in the hands of customers
should be updated at the next available opportunity. At the time of customer appointment, ensure that all outstanding service campaigns for each
individual vehicle are identified and allocate sufficient time and resources to complete all campaigns.
PARTS
TOOLS:
Refer to Workshop Manual for any required special tools
2012 Land Rover Range Rover (LM) V8-5.0L Copyright ? 2013, ALLDATA 10.52SS Page 2
WARRANTY
REPAIR PROCEDURE
CAUTION:
Take extra care to protect the headlining from the soft sealant. Contact between the headlining and sealant may cause permanent damage to
the headlining.
CAUTION:
Always protect paintwork and glass when removing exterior components.
CAUTION:
Always protect the interior components when removing body glass.
1. Refer to Workshop Manual section 501-11 and replace the front windshield:
^ Use masking tape to protect the headlining.
^ Use a suitable spatula-type instrument to remove any soft sealant from any contact areas where the new windshield glass is installed.
^ Use a suitable cloth and cleaning fluid to remove any remaining residue from any contact areas where the new windshield glass is installed.
2012 Land Rover Range Rover (LM) V8-5.0L Copyright ? 2013, ALLDATA 10.52SS Page 3
Affected VIN List - P028
2012 Land Rover Range Rover (LM) V8-5.0L Copyright ? 2013, ALLDATA 10.52SS Page 1
Vehicle: All Technical Service Bulletins
Recall - Front Windshield Bonding
P028NAS1
22 OCT 2012
SECTION: 501-11
Safety Recall: Front Windshield Bonding
AFFECTED VEHICLE RANGE:
Range Rover (LM) VIN: CA370800 - CA370892
(specific VINs only; see attached list)
Model Year: 2012
CONDITION SUMMARY:
Situation:
A concern has been identified with certain 2012 model year Range Rover vehicles with the windshield which may not be correctly bonded to the
aperture. Where the windshield is not correctly bonded, water ingress might occur and there may be increased wind noise. In extreme cases where
there is insufficient bond between the windshield glass and the Polyurethane (PU) adhesive, full windshield retention may not be achieved in the
event of an air bag deployment or during a vehicle crash increasing risk of occupant injury.
Action:
Retailers are required to HOLD all affected vehicles in the above VIN range that are in their control and refrain from releasing the vehicles for new
or used vehicle sale pending completion of the rework action detailed in this Technical Bulletin. Affected vehicles already in the hands of customers
should be updated at the next available opportunity. At the time of customer appointment, ensure that all outstanding service campaigns for each
individual vehicle are identified and allocate sufficient time and resources to complete all campaigns.
PARTS
TOOLS:
Refer to Workshop Manual for any required special tools
2012 Land Rover Range Rover (LM) V8-5.0L Copyright ? 2013, ALLDATA 10.52SS Page 2
WARRANTY
REPAIR PROCEDURE
CAUTION:
Take extra care to protect the headlining from the soft sealant. Contact between the headlining and sealant may cause permanent damage to
the headlining.
CAUTION:
Always protect paintwork and glass when removing exterior components.
CAUTION:
Always protect the interior components when removing body glass.
1. Refer to Workshop Manual section 501-11 and replace the front windshield:
^ Use masking tape to protect the headlining.
^ Use a suitable spatula-type instrument to remove any soft sealant from any contact areas where the new windshield glass is installed.
^ Use a suitable cloth and cleaning fluid to remove any remaining residue from any contact areas where the new windshield glass is installed.
2012 Land Rover Range Rover (LM) V8-5.0L Copyright ? 2013, ALLDATA 10.52SS Page 3
Affected VIN List - P028
