***********************************************************************************
********************************************************************************82012 Land Rover Range Rover (LM) V8-5.0L SC Page 1
Vehicle: All Technical Service Bulletins
Body - Revised Body Removal/Installation
No.: LTB00278
Issue: 1
Date: 27 APR 2010
SECTION: 502
Revised Workshop Procedure: Body Assembly Remove / Refit
AFFECTED VEHICLE RANGE:
CONDITION SUMMARY:
Situation:
The Workshop Manual procedure for removing and refitting the body assembly has been revised. The revised procedure has several steps removed or re-timed, including but not limited to:
- Bumper renew (front and rear) has been replaced with bumper remove / refit for access
- Complete coolant drain has been replaced with a coolant top up as only one (1) liter is lost
- Shields located under the front wheel arches no longer require removal
- Steering column repair time has been reevaluated
NOTE:
Associated repair times requiring body removal will also change.
Action:
When removing and refitting the body assembly, refer to the Repair Procedure outlined below.
PARTS:
No parts necessary; information only
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.
2012 Land Rover Range Rover (LM) V8-5.0L SC Page 2
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal warranty policy and procedures apply.
REPAIR PROCEDURE
REMOVE / REFIT BODY ASSEMBLY
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > Model > Service Information > Model Year > Workshop Manual
1. Refer to Workshop Manual (GTR) section 502-02, Full Frame and Body Mounting, to remove / refit the body assembly.
