2013 Land Rover LR2 (LF) L4-2.0L Turbo Technical Service Bulletin # TECLTB00161 Date: 081007
Drivetrain - Revised R/I Of The Active On-Demand Coupler Module
No: LTB00161
Issue: 1
Date: 07 OCT 2008
SECTION: 205
New Workshop Procedure - Remove / Install the Active
On-Demand Coupling Module
AFFECTED VEHICLE RANGE:
LR2 (LF)
VIN: 8H000212 - Onwards
Model Year: 2008 - Onwards
CONDITION SUMMARY:
Situation:
The procedure to remove / install the Active On-Demand Coupling Module has been revised. It is no longer necessary to drain and refill the oil
within the unit.
Action:
In the event it becomes necessary to remove / install the Active On-Demand Coupling Module, refer to the Repair Procedure outlined below.
PARTS:
No parts necessary; information only
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.
Always refer to DDW to obtain the latest repair time.
2013 Land Rover LR2 (LF) L4-2.0L Turbo Page 47
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
Normal warranty policy and procedures apply.
REPAIR PROCEDURE:
REPLACE ACTIVE ON-DEMAND COUPLING MODULE
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > LF-LR2 > Service Information > Model Year > Workshop Manual >
2: Chassis > 205-02 > Rear Drive Axle / Differential > Active On-Demand Coupling Module (51.30.03)
1. Refer to Workshop Manual (GTR) Section 51.30.03 to remove / install the Active On-Demand Coupling Module.
